Exp-1 : To measure the AC mains supply at 3/5 pins main socket.

 Exp-1 : To measure the AC mains supply at 3/5 pins main socket.

Objective : 

                To measure the AC mains supply at 3/5 pins main socket.

Apparatus required:

  • AC Main supply.
  • Extension board with a 3/5 pins socket.
  • Multimeter with connecting wires.

Procedure:

  1.  As shown in the fig, the thrhee pins as Line(L), Neutral(N), and Earth(E) were identified and marked on the extension board.
  2. Connected extension board plug to AC mains supply.
  3. Connected the connecting wires to the multimeter and set its range to AC 250V.




      4. On the extension board, the connecting wires from multimeter were inserted into two pins of the             socket as mentioned   below.

  • Line and Earth
  • Line and Neutral
  • Neutral and Earth.

    5. For each of the above pairs, Voltage supply was measured.


Result:

  1. Line and Earth : 240 Volts
  2. Line and Neutral : 240 Volts
  3. Neutral and Earh : 0 Volts

Here The line (L) pin is also know as Phase (P)


Popular posts from this blog

Install Windows 7 Operating System - Practical

Image
COPA  Install Windows  -7  Operating System I have learned basically these steps to install windows operating system on Personal Computer(PC) The three basic types of clean installation procedures are as follows: Install on a brand new disk or computer system Erase the disk, format it, and install Install into a new directory I am using  first two methods, be sure my computer can boot from a DVD (most newer computers support booting from a DVD drive). Doing so might require changing the drive boot order in the BIOS or CMOS. The Windows 7 DVD is bootable and should run the Setup program automatically. Clean Install from DVD, Step by Step A typical clean installation (on a blank hard disk) step-by-step procedure is as follows: 1. Insert the Windows 7 DVD into your computer’s DVD-ROM drive, and restart the computer. Windows 7 Setup should start automatically. If Setup does not start automatically, ensure that your computer is configured to boot from the DVD drive. 2. In...
Read more

COPA Bits for Computer Based Test (CBT) by Venugopal Vanjarapu

  Computer Operator and Programming Assistant 1st Semester - Module 1 & 2: Safe Working Practice & Introduction to Computer Components 1 Which is the sequence, in which computer operates?  A Input, output, process  B Input, process, output  C Process, input, output  D Output, process, input  2 Which is the first general purpose programmable electronic computer?  A ENIAC B EDVAC  C EDSAC  D UNIVAC  3 What type of device is computer?   A Electrical device  B Electronic device  C Electro magnetic  D Electro mechanical  4 Who is considered as father of computer?  A Charles Babbage  B John Lickert  C John Mauchy  D M.V Wilkes  5 Who invented Analytical engine?  A Charles Babbage  B John Lickert  C John Mauchy  D M.V Wilkes  6 What is the main electronic component of the first generation computer?  A Integrated circuit  B Microprocess  C Transisto...
Read more

COPA

COPA Computer Operator and Programming Assistant (COPA) Exp No Trade Practical Trade Theory CBT Exam Study Material Video Lesson 1 1 1 Study Material Video Lesson 2 2 2 3 3 3 4 Installing Window Operating System Operating System 5 MS-DOS Commands Operating System 6 Linux Commands Operating System 7 Create new document, open existing document, edit document and save the documents Ms Word 8 Formatting text, inserting objects, tables, hyperlinks, autocorrect features, thesaurus, spelling and grammar Ms Word 9 ...
Read more